Description
The ModTX LED flush-mount doorbell button reflects simplicity and modernism. A 3/16 inch thick, 6oz panel of brushed copper presents a push button backlit by a thin illuminated halo. The button responds with a soft audible click and gentle tactile feedback. The contained ultra-efficient LED emits a bright white glow even in daylight, using less than one watt and lasting approximately 10 years.
Install it yourself: Two post terminals easily connect to low voltage doorbell systems. The panel is 100% solid copper with gold tones, brushed and lightly polished, and will naturally patina over time. Cuts and finishes may contain small imperfections, and vary in fit and finish from the images shown.
MOUNT
• (3M): Includes durable 3M weather-resistant outdoor mounting tape for use on smooth, clean surfaces.
FINISH
• Natural: A natural finish will patina over time and turn darker hues of brown, with possibilities of blue and pale green depending on the environment.
• Sealed: A sealed finish will retain a bright orange glow.
REQUIREMENTS:
• Wall opening required: 5/8″ (16mm) wide. Back of buttons will recess 1.1″, (1.4″ deep with wiring).
• Universal compatibility. Fits all wired 12-24 volt doorbell systems such as Nicor Primechime, Heath Zenith SL-27102-02 or Vercoma bell pusher systems.
SPECIFICATIONS:
• IP67 Waterproof
• Panel dimensions: ~6″ tall x 1.25″ wide x 3/16″ thick
• 100% solid copper construction
• Made in USA of U.S. and imported parts. Cut, polished and assembled in Texas.
• Lifetime warranty.
